MAM Tech Address


Specializing in CNC and Manual Precision Machine Tools
Mechanical Alignment
Laser Alignment
Laser Calibration
BallBar Analysis

On-Site Precision Machine Tool Alignment and Calibration
Laser Measurement Services
In Your Shop, On Your Machine

About Us

Measurement & Machine Technology offers the highest quality machine tool alignment, laser calibration, and repair services available. For over 30 years, we have provided superior service to our customers. Our experience and commitment to excellence combined with our Can-Do attitude has earned us a reputation as one of the finest machine tool alignment and laser calibration service organizations available today.

We began in 1982 by servicing, selling and installing DIGITAL READOUT SYSTEMS for manual machine tools. The addition of a Hewlett Packard Dynamic Laser Alignment and Calibration System in 1986 enabled us to take a "hands-on" approach calibrating these systems; over time we have gained extensive experience aligning and calibrating numerous makes and models of Manual and CNC Precision Machine Tools.

We have continued to focus our efforts on improving the alignment and accuracy of the many various makes and models of precision machine tools from calibration only all the way through to On-Site rebuild of alignment geometry including, evaluation, recommendations, implementation, completion and laser verification. Some examples of an On-Site rebuild are; a Mori-Seiki MV-80, a MAKINO MCB1510 Horizontal CNC Mill (four at one customer), an OM CNC VTL, an OKUMA CNC Mill, Toyoda FA-450 (two at one customer) and FA-630 Horizontal CNC Machining Center, a G&L MC-60 Horizontal 6" Spindle and a PRATT WHITNEY manual jig borer. These projects and many more give us invaluable experience in many areas of machine tool service including but not limited to, mechanical alignment and repair, electrical / electronic troubleshooting and repair, CNC Laser calibration.

 

We do not specialize;
we apply our experience across all lines.

Makino FNC 74Ingersol Floor Mill

 

 

 

 

 

 

 

We are experienced with LARGE machines as seen above. This Ingersoll Floor Mill project was leveling and straightening of the X Axis runway, checking and adjusting the squareness between axes and final laser calibration.

As seen above we do smaller machines as well. X table was not aligned on this Makino FNC-74; we removed the table, replaced the turcite, and scraped for alignment, after verifying the geometry we laser calibrated the axes.

 

 

 

Thank You, for browsing our site. If you have any questions or would like to speak with a us regarding our services,
 please e-mail us. timpray@measurementandmachine.com
or call us any time at 313-530-5083